Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Driveline Module >> Standard Procedure >> Standard Procedure - Drain And Fill

Standard Procedure - Drain And Fill

Fig 1: Drain And Fill Plugs
GC0098399Courtesy of CHRYSLER GROUP, LLC
  1. Remove fill plug (1) and drain plug (2). Drain fluid.
  2. Install drain plug (2) and tighten to 32 N.m (24 ft.lb.).
  3. Fill with MOPAR® MS (special tool #9020, Insert, Crankshaft) SAE 80 W90 Gear Lube to bottom of fill plug.
  4. Install fill plug (1) and tighten to 32 N.m (24 ft.lb.).
scientia non olet · About Mike's Workshop Manuals