Module, Drivetrain Control: Removal: Removal

Fig 1: Identifying Drivetrain Control Module (DTCM) & Nuts

Courtesy of CHRYSLER GROUP, LLC

1. Open the liftgate.
2. Disconnect the battery negative cable.
3. Remove the liftgate sill plate. Refer to PLATE, SCUFF, DOOR SILL, REMOVAL .
4. Remove the load floor. Refer to LOAD FLOOR, CARGO, REMOVAL .
5. Disconnect the electrical connectors.
6. Remove the two nuts (1) holding the module in place.
7. Remove the Drive Train Control Module (DTCM).