Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2013 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Power Distribution) >> Fuse, IOD >> Installation >> Installation

Fuse, IOD: Installation: Installation

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

It is extremely important that the Ignition Off Draw (IOD) fuse is fully seated into the Totally Integrated Power Module (TIPM) fuse cavity. Failure to install the fuse correctly could result in erratic electrical systems behavior.

  1. Open the TIPM cover.
  2. Insert fuse J13 into the TIPM. Push fuse down until it is fully seated in the TIPM cavity.
  3. Close the TIPM cover.
scientia non olet · About Mike's Workshop Manuals