Sensor, Fuel Tank Pressure: Removal: Removal

Fig 1: Fuel Tank Pressure Sensor Connector

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the fuel filler cap to relieve tank pressure.
3. Raise and support the vehicle (Refer to HOISTING ).
4. Disconnect the fuel tank pressure sensor electrical connector (1).
   Fig 2: Retaining Tab & Fuel Tank Pressure Sensor

   Courtesy of CHRYSLER GROUP, LLC
5. Carefully raise the retaining tab (2), rotate and remove the fuel tank pressure sensor (1) from the fuel tank vent tube.
   Fig 3: Fuel Tank Pressure Sensor Seal

   Courtesy of CHRYSLER GROUP, LLC
6. The fuel tank pressure sensor seal (1) can be reused if not damaged.