Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2013 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> 3.6L - DTCS P000A To P0155 >> Diagnosis And Testing >> P0111-Intake Air Temperature Sensor Performance >> Set Condition

Set Condition

After a calibrated amount of cool down time, the Powertrain Control Module (PCM) compares the Ambient Air Temperature (AAT), Engine Coolant Temperature (ECT), and Intake Air Temperature (IAT) Sensor values. If one sensor value is not within 10°C (18°F) of the other temperature sensors for two consecutive trips, a DTC will set. Three good trips to turn off the MIL.

scientia non olet · About Mike's Workshop Manuals