Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2013 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Exhaust System) >> Sensor, Exhaust Temperature >> Installation >> Exhaust Temperature Sensor 1/2

Exhaust Temperature Sensor 1/2

WARNING: This page is about a different car, the 2012 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Temperature Sensor
GC0146437Courtesy of CHRYSLER GROUP, LLC
  1. Install the exhaust temperature sensor (1) and tighten to 47 N.m (35 ft. lbs.).
    Fig 2: Exhaust Temperature Sensor Connector
    GC0146438Courtesy of CHRYSLER GROUP, LLC
  2. Connect the exhaust temperature sensor wire harness connector (1).
  3. Install the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals