Retainer, Battery: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Battery Tray, Bolt, & Retainer

Courtesy of CHRYSLER GROUP, LLC

Install the battery hold down (2) into the vehicle.
Install the battery hold down retaining bolt (1). Tighten the bolt to 7 N.m (62 in. lbs.).

Fig 2: Air Cleaner Box And Snorkel
Courtesy of CHRYSLER GROUP, LLC
Install the air cleaner fresh air duct (2) and secure in place by rotating the two retaining clips (3).
Connect the battery negative cable.