Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal >> Removal

Sensor, Boost Pressure: Removal: Removal

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Mixing Chamber, Harness Connector, Boost Pressure Sensor & Bolts
GC0138080Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the boost pressure sensor (3) harness connector (2).
  4. Remove bolts (4) and the boost pressure sensor (3) from the mixing chamber (1).
scientia non olet · About Mike's Workshop Manuals