Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Exhaust System) >> Sensor, Exhaust Temperature >> Installation >> Installation

Sensor, Exhaust Temperature: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Temperature Sensor - DPF
GC0098844Courtesy of CHRYSLER GROUP, LLC
1 - UPSTREAM DPF TEMPERATURE SENSOR ELECTRICAL CONNECTOR
2 - UPSTREAM DPF TEMPERATURE SENSOR
3 - DOWNSTREAM DPF TEMPERATURE SENSOR ELECTRICAL CONNECTOR
4 - DOWNSTREAM DPF TEMPERATURE SENSOR
  1. Position DPF downstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  2. Connect downstream temperature sensor electrical connector.
  3. Position DPF upstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  4. Connect upstream temperature sensor electrical connector.
  5. Install engine cover.
scientia non olet · About Mike's Workshop Manuals