Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Occupant Restraint Controller (Orc) - Electrical Diagnostics >> DTC Troubleshooting >> B2101-Ignition Run/Start Input Circuit Low >> Set Condition:

Set Condition:

With the ignition on, if voltage on the Fused Run/Start Relay Output circuit is equal to or below 6.25 ± 0.25 volts or within 60 seconds of turning the ignition off, if the Fused Run/Start Relay Output circuit is between 2.4 to 5.0 volts.

scientia non olet · About Mike's Workshop Manuals