Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Park Assist >> Removal >> Removal

Module, Park Assist: Removal: Removal

Fig 1: Park Assist Module & Connector
GC0145734Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the right quarter interior trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
  3. Disconnect the body wire harness connector (3) from the park assist module connector receptacle (4). Vehicles with the front park assist option will have a second connection to the module at this location, which must also be disconnected.
  4. Remove the fasteners that secure the park assist module (1) to the inner quarter panel (2).
  5. Remove the module from the vehicle.
scientia non olet · About Mike's Workshop Manuals