Keyless Go System
WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
If the Keyless Go (KG) feature is inoperative, it may be caused by an invalid FOB with Integrated Key (FOBIK), or a FOBIK with a dead battery. Additionally if the Remote Keyless Entry (RKE) is inoperative, the KG will also be inoperative.
The message center displays the following messages when certain conditions are met.
- Key FOB Battery Low - Displayed when the battery in the FOBIK is low. At this point the Keyless Go function should still operate, but the battery should be replaced soon.
- Key FOB Not Detected - Displayed when a valid FOBIK could not be detected inside the vehicle
- Push Pedal + Button to Start - Displayed when one enters the vehicle.
- Service Keyless System - Displayed when there is a problem with the KGsystem.
- Vehicle Not in Park - Displayed when shutting off the vehicle while the transmission is not in the PARK position.
For further information, refer to appropriate Electrical Diagnostic article.