Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Active Cruise Control (Acc) Module - Electrical Diagnostics) >> DTC Troubleshooting >> P1666-00-Cruise Control Module Internal >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. VERIFY DTC IS ACTIVE 
    1. Using a scan tool, read ACC DTCs.

      Is the DTC active at this time?

      Yes 

      • Replace the ACC Module in accordance with the Service Information.
      • Perform the ACC MODULE VERIFICATION TEST. Refer to STANDARD PROCEDURE .

      No 

      • No repair is necessary. Make sure the lens is free of dirt, damage, and other obstructions. Clear the DTC and verify the proper operation of the ACC system.
      • Perform the ACC MODULE VERIFICATION TEST. Refer to STANDARD PROCEDURE .