Exhaust Temperature Sensor 1/1

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the engine cover (1).

Fig 2: Cowl Extension Silencer, Side Extensions & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the cowl extension (1) and the side extensions (2, 5). Refer to SILENCER, COWL EXTENSION, REMOVAL .

Fig 3: Two Nuts, Air Inlet Duct & Dash Panel
Courtesy of CHRYSLER GROUP, LLC
Remove nuts and the HVAC air inlet housing (1).

Fig 4: Oxygen Sensor Connector & Ball Stud Fastener
Courtesy of CHRYSLER GROUP, LLC
Disconnect the oxygen sensor wire harness connector (1).
Disconnect the upstream exhaust temperature sensor wire harness connector.

Fig 5: Diesel Particulate Filter Clamp
Courtesy of CHRYSLER GROUP, LLC
Loosen the clamp (2) and separate the Diesel Particulate Filter (DPF) from turbocharger.

Fig 6: Exhaust Manifold, Gaskets, Turbocharger, Cylinder Head & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the exhaust temperature sensor (7).