Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Heated Seat >> Removal >> Removal

Module, Heated Seat: Removal: Removal

Fig 1: Two Bolts, Bracket & Heated Seat Module (HSM)
GC0145750Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the fasteners that secure the front passenger seat to the body and tip the seat rearward to gain access to the underneath of the seat. Refer to SEAT, FRONT, REMOVAL .
  3. Remove the two bolts (1) that secure the bracket (2) containing the Heated Seat Module (HSM) (3) to the underside of the seat cushion frame (4).
  4. Disengage the metal bracket retaining tab (5) from the underside of the seat cushion frame.
    Fig 2: Electrical Connectors, Heated Seat Module (HSM), Retaining Tab, Bracket & Two Retaining Tabs
    GC0145751Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the electrical connectors (1, 2 and 5) from the Heated Seat Module (HSM) (4).
  6. Disengage the retaining tab (3) from the bracket (7).
  7. Tip the inboard end of the HSM upward to disengage the two retaining tabs (6) from the bracket and remove the HSM.
scientia non olet · About Mike's Workshop Manuals