Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Vehicle Theft Security (Service Information)) >> Standard Procedure >> Sentry Key Transponder Programming

Sentry Key Transponder Programming

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The Sentry Key transponder of all Finger Operated Button Integrated Key (FOBIK) units included with the vehicle are pre-programmed to work with the Radio Frequency Hub (RF-Hub) when it is shipped from the factory. The RF-Hub may be programmed to recognize up to a total of eight FOBIK units. When programming a blank Sentry Key FOBIK, the integrated valet key must be cut to match the door lock cylinder in the vehicle for which it will be used. Once the additional or new key has been cut, the RF-Hub must be programmed to recognize it as a valid FOBIK. Refer to IMMOBILIZER COMPONENTS AND REPLACEMENT GUIDE .

scientia non olet · About Mike's Workshop Manuals