Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Power Seats (Service Information)) >> Switch, Memory >> Removal >> Removal

Switch, Memory: Removal: Removal

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Take the proper precautions to protect the door handle and bezel from cosmetic damage while performing this procedure.

Fig 1: Memory Seat Switch & Retaining Tabs
GC0144635Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the driver door handle and place it on a workbench. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Using an appropriate flat bladed tool, gently disengage the four retaining tabs (2 and 4) that secure the memory seat switch (1) to the back of the driver door handle bezel (3).
  4. Remove the memory seat switch from the driver door handle bezel.
scientia non olet · About Mike's Workshop Manuals