Diagnostic Test
WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
FORWARD FACING CAMERA VERIFICATION TEST
- Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
- With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
- Make sure that all accessories are turned off and that the battery is fully charged.
- If the FFCM was replaced or moved in any way, with the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to FORWARD FACING CAMERA - CALIBRATION PROCEDURE .
- With the scan tool, read FFCM DTCs.
Are there any DTCs present in the FFCM?
Yes
- Repair the FFCM DTC(s). Refer to DIAGNOSIS AND TESTING .
No
- Repair is complete.