Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2012 >> Compass Limited, AWD, Automatic CVT, CVT2L >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Power Door Lock System (Service Information)) >> SWITCH, Lock >> Installation >> Installation

SWITCH, Lock: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Door Lock/Unlock Switch
GC0085986Courtesy of CHRYSLER LLC
  1. Connect the electrical harness connector to the switch.
  2. Press the switch into place.
  3. Connect the battery negative cable.