Diagnostic Test

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY THE DTC IS ACTIVE
NOTE:
Make sure the IOD fuse is installed and battery Voltage is between 10 and 16 Volts before proceeding.
1. Turn the ignition on.
2. Using a scan tool, read DTCs.
  Is the DTC active at this time?
  
  Yes
  - Perform the appropriate diagnostic procedure. Refer to BCM, DTC'S B10B3 - B1ED2-11 - DIAGNOSIS AND TESTING or BCM, DTC'S B1ED2-2A - U1433 - DIAGNOSIS AND TESTING .
  No
  - Perform the Stored Lost Communication DTCs diagnostic procedure. Refer to COMMUNICATION - DIAGNOSIS AND TESTING .