Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2011 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Powertrain Control Module (Pcm) - Electrical Diagnostics - 42RLE Automatic Transmission >> DTC Troubleshooting >> P0726-Engine Speed Input Circuit Range/Performance >> Set Condition:

Set Condition:

This DTC will set when the calculated engine speed is less than 390 RPM with the engine running, or greater than 8000 RPM, for the period of 2.0 seconds. The PCM will place the Transmission in Limp-in when this DTC is set. Note: This is not a Transmission Input Speed Sensor DTC. 

scientia non olet · About Mike's Workshop Manuals