SENSOR, Infrared Temperature: Installation: Installation
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Take the proper precautions to protect the front face of the overhead console from cosmetic damage while performing this procedure.
NOTE:
Typical overhead console shown.
- Position the infrared sensor (3) onto the back of the overhead console (1). Align the tab (4) on the sensor with the slot in the console.
- Install the screw (2) that secures the infrared sensor(s) to the overhead console. Tighten the screw to 1.2 N.m (10 in. lbs).
- Install the overhead console. Refer to Electrical - Message Systems/Overhead Console - Installation .
- Reconnect the negative battery cable.