SEAL, Extension Housing: Installation: Installation

Fig 1: Installing Transmission Housing Seal

Courtesy of CHRYSLER LLC

1 - SPECIAL TOOL C-3995-A OR C-3972-A

2 - SPECIAL TOOL C-4471

1. Place seal in position on overdrive housing.
2. Drive seal into overdrive housing with Seal Installer (special tool #C-3995-A, Installer, Seal) (1). Refer to Fig 1.
3. Carefully guide propeller shaft slip yoke into housing and onto output shaft splines. Align marks made at removal and connect propeller shaft to rear axle pinion yoke.