PEDAL, Accelerator: Installation: Installation
WARNING: This page is about a different car, the 2011 Jeep Patriot and 2011 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The accelerator pedal and mounting nuts need to be torque in a mandatory torque sequence or damage could result to the pedal assembly.
- Install the accelerator pedal and mounting nuts to the mounting studs. Tighten the nuts in a mandatory torque sequence to 16 N.m (12 ft. lbs.).
- Connect the electrical connector from accelerator pedal.
- Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).
- Use a scan tool and perform the APPS RELEARN function.