Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2011 >> Compass Base, 2.4 B, FWD, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> SENSOR, Fuel Temperature >> Removal >> Removal

SENSOR, Fuel Temperature: Removal: Removal

Fig 1: Identifying Quarter Turn Lock Tabs & Air Inlet Duct
GC0137828Courtesy of CHRYSLER LLC
  1. Remove the engine cover.
  2. Remove air inlet duct (2).
  3. Disconnect the negative battery cable.
  4. Remove cooling fan assembly. Refer to FAN, Cooling, Removal .
    Fig 2: Identifying Bolts & Heat Shield
    GC0137974Courtesy of CHRYSLER LLC
  5. Remove bolts (1) and the heat shield (2).
    Fig 3: Identifying Fuel Temperature Sensor Harness Connector
    GC0138005Courtesy of CHRYSLER LLC
  6. Disconnect the fuel temperature sensor harness connector (2).
  7. Remove the fuel temperature sensor (1).
  8. Remove and discard sealing washer and O-ring.
scientia non olet · About Mike's Workshop Manuals