Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2011 >> Compass Base, 2.4 B, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Cooling System - MK) >> Engine >> Heater, Engine Block >> Installation

Heater, Engine Block: Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Thoroughly clean bore hole.
  2. Insert block heater assembly into bore.
  3. Install retaining clip.
  4. Connect power cord to block heater.
    GC0098469Courtesy of CHRYSLER GROUP, LLC
  5. Install air intake inlet.
  6. Install engine cover.
scientia non olet · About Mike's Workshop Manuals