SHIFTER, Transmission: Installation: Installation

Fig 1: Electrical Connector AT Shifter

Courtesy of CHRYSLER LLC

1. Plug the electrical connector in at the shifter.
   Fig 2: Shifter

   Courtesy of CHRYSLER LLC
2. Install the shifter in place.
3. Clip the shift cable to the shifter.
   Fig 3: Shifter Hold Down Bolts

   Courtesy of CHRYSLER LLC
4. Install the shifter bolts and tighten to 70 N.m (52 ft. lbs.).
   Fig 4: Center Console

   Courtesy of CHRYSLER LLC
5. Place console housing (1) over shifter lever ensuring console tabs seat properly.
   Fig 5: Center Console Housing Screws

   Courtesy of CHRYSLER LLC
6. Install screws (1).
7. Replace shift bezel and knob. Refer to BEZEL, Shifter, Installation .