VALVE, Fuel Quantity Control: Removal: Removal

Fig 1: Identifying Fuel Quantity Control Valve Harness Connector

Courtesy of CHRYSLER LLC

1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove the mixing chamber Refer to MANIFOLD, Intake, Removal or MANIFOLD, Intake, Removal .
4. Clean surrounding area by the fuel quantity control valve.
5. Disconnect the fuel quantity control valve harness connector (1).
   Fig 2: Identifying Fuel Quantity Control Valve & Bolts

   Courtesy of CHRYSLER LLC
6. Remove bolts (2) and the fuel quantity control valve (1).