MODULE, Engine Control: Installation: Installation

Fig 1: AIR FILTER

Courtesy of CHRYSLER LLC

1. Install ECM on mounting bracket . Torque nuts to 10.7N.m (95 lbs. in.).
2. Install ECM (2) and mounting bracket assembly in vehicle .
3. Connect both ECM (2) electrical connectors.
   Fig 2: AIR INLET DUCT

   Courtesy of CHRYSLER LLC
4. Install air cleaner housing assembly (2). Refer to Engine/Air Intake System/BODY, Air Cleaner - Installation .
5. Connect vacuum hose (1).
6. Connect negative battery cable.
7. Install air inlet tube (3).
8. Reprogram ECM. See Electrical/Electronic Control Modules/MODULE, Engine Control - Standard Procedure .