Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2009 >> Compass Limited, ED3, FWD, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows (Service Information) >> MOTOR, Window Regulator >> Removal >> Removal

MOTOR, Window Regulator: Removal: Removal

  1. Move the window to the full UP position, if possible.
  2. Disconnect and isolate the battery negative cable.
  3. Remove the front door module. Refer to Body/Door - Front/PANEL, Door Trim - Removal .
  4. Disconnect electrical harness connector from motor.
  5. Remove window regulator.
  6. With regulator on bench, remove four screws retaining the motor to the regulator and remove motor.