Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2009 >> Compass Limited, ED3, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal >> Removal

Sensor, Accelerator Pedal Position: Removal: Removal

Fig 1: Accelerator Pedal Sensor
GC0098890Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Disconnect the electrical connector from accelerator pedal.
  3. Remove mounting nuts and remove accelerator pedal from the mounting studs.
scientia non olet · About Mike's Workshop Manuals