A/C System
| Item | Description | Notes |
|---|---|---|
| A/C Compressor |
Denso 10S17 - 3.0L/3.7L/4.7L Engines Denso 10SRE18 - 5.7L Engine with Front A/C Only Denso 10SRE20 - 5.7L Engine with Front and Rear A/C |
ND-8 PAG oil |
| Freeze-up Control | Evaporator Temperature Sensor | HVAC housing mounted (front) |
| Low psi Control | A/C Pressure Transducer | A/C Discharge line mounted - opens below 110 kPa (16 psi), closes above 221kPa (32 psi) |
| High psi Control | A/C Pressure Transducer | A/C Discharge line mounted - opens above 3219 kPa (476 psi), closed below 2937 kPa (426 psi) |
| R-134a Refrigerant Charge Capacity |
Front A/C only - 0.68 kg (1.5 lbs.) Front and Rear A/C - 0.963 kg (2.125 lbs.) |
Also see A/C Underhood Specification Label located in the engine compartment |
| A/C Clutch Coil Draw | 3.2 - 3.3 amps | @ 12V ± 0.5V @ 21° C (70° F) |
| A/C Clutch Coil Resistance | 3.6 ± 0.2 ohms | When measured across coil lead connector |
| A/C Clutch Air Gap | 0.35 - 0.60 mm (0.014 - 0.024 in.) |