Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (3.7L Engine (Service Information)) >> Lubrication >> Sensor/Switch-Oil Pressure >> Operation >> Oil Pressure Sensor/Switch

Oil Pressure Sensor/Switch

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.

The oil pressure switch is normally "Closed." The switch changes from a "Closed" circuit to an "Open" circuit, on increasing pressure of 7 psig. The oil pressure switch changes from an "Open" circuit to a "Closed" circuit, on decreasing pressure, between 2 psig and 4 psig.

scientia non olet · About Mike's Workshop Manuals