Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2008 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Upper Control Arm >> Removal >> Upper Control Arm - Right

Upper Control Arm - Right

  1. Raise and support the vehicle.
  2. Remove the right side tire and wheel assembly.
  3. Remove the upper ball joint nut.
    Fig 1: Upper Ball Joint Separation
    GC0061153Courtesy of CHRYSLER LLC
  4. Separate the upper ball joint from the steering knuckle (3) using remover 9360 (2).
  5. Lower the vehicle.
  6. Remove the air box assembly. Refer to REMOVAL .
  7. Remove the upper control arm rear bolt/nut.
  8. Remove the upper control arm front bolt/nut.
  9. Remove the upper control arm from the vehicle.
scientia non olet · About Mike's Workshop Manuals