Module-Steering Column Control: Assembly

WARNING: This page is about a different car, the 2008 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Jumper Wire Harness Connector, Right Multi-Function Switch & Clockspring

Courtesy of CHRYSLER LLC

Connect the right stalk electrical connector.

Fig 2: Right Multi-Function Switch
Courtesy of CHRYSLER LLC
Slide the right stalk into the groove and install the one retaining screw.

Fig 3: Left Stalk Switch Electrical Connector
Courtesy of CHRYSLER LLC
Connect the left stalk switch electrical connector.

Fig 4: Left Stalk Switch
Courtesy of CHRYSLER LLC
Install the left stalk switch retaining screw.