Steering Column Control Module

WARNING: This page is about a different car, the 2008 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Screws, Steering Column & SCCM (With Switch Stalks)

Courtesy of CHRYSLER LLC

Slide the Steering Column Control Module (SCCM) (with switch stalks) (3) onto the steering column (2).
Install the screws (1) attaching the SCCM (with switch stalks) (3) to the steering column (2). Tighten the screws to 3 N.m (27 in. lbs.).