Fluid - Capacities & Recommended: Specifications: Specifications
ENGINE - EXCEPT EXPORT
| Component | Fluid, Lubricant, or Genuine Part |
|---|---|
| Engine Coolant | Mopar® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) |
| Engine Oil (3.7/4.7/5.7L Engines) | Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. |
| Oil Filter (All Engines) | Mopar® Oil Filter (P/N 05281090) |
| Spark Plugs (3.7L Engine) | ZFR6F-11G (Gap 0.043 in [1.09 mm]) |
| Spark Plugs (4.7L Engine) | Upper Bank - FR8TE2 (Gap 0.040 in [1.02 mm]) Lower Bank - FR8T1332 (Gap 0.050 in [1.27 mm]) |
| Spark Plugs (5.7L Engine) | REC14MCC4 (Gap 0.043 in [1.09 mm]) |
| Fuel Selection (3.7/4.7L Engines) | 87 Octane |
| Fuel Selection (5.7L Engines) | 87 Octane Acceptable - 89 Octane Recommended |
ENGINE - EXPORT
| Component | Fluid, Lubricant, or Genuine Part |
|---|---|
| Engine Coolant | Mopar® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) |
| Engine Oil - Non ACEA Categories (4.7L and 5.7L Engines) | Use API Certified SAE 5W-20 engine oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. |
| Engine Oil - ACEA Categories (4.7L and 5.7L Engines) | For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. |
| Engine Oil (3.0L Diesel Engine) | Use SAE 5W-30 Synthetic Low Ash Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-11106 and approved to MB 229.31 or MB 229.51 and ACEA C3. |
| Oil Filter (4.7 and 5.7L Gasoline Engines) | Mopar® Oil Filter (P/N 05281090) |
| Oil Filter (3.0L Diesel Engine) | Mopar® Oil Filter (P/N 05175571AA) |
| Spark Plugs (4.7L Engine) | Upper Bank - FR8TE2 (Gap 0.040 in [1.02 mm]) Lower Bank - FR8T1332 (Gap 0.050 in [1.27 mm]) |
| Spark Plugs (5.7L Engine) | REC14MCC4 (Gap 0.043 in [1.09 mm]) |
| Fuel Selection (4.7L Engine) | 91 Octane |
| Fuel Selection (5.7L Engine) | 91 Octane Acceptable - 95 Octane Recommended |
| Fuel Selection (3.0L Diesel Engine) | Use good quality diesel fuel from a reputable supplier in your vehicle. The manufacturer requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. If the vehicle is exposed to extreme cold (below 20F or -7C), or is required to operate at colder-than-normal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters. This vehicle is fully compatible with biodiesel blends up to 5% biodiesel meeting ASTM specification D-975. |
CHASSIS - EXCEPT EXPORT
| Component | Fluid, Lubricant, or Genuine Part |
|---|---|
| Automatic Transmission | Mopar® ATF+4 Automatic Transmission Fluid |
| Transfer Case (NV140 Single Speed Only) | Mopar® ATF+4 Automatic Transmission Fluid |
| Transfer Case (NV245 Two Speed Only) | Mopar® NV 247/245 Transfer Case Lubricant |
| Axle Differential (Front-Rear) | Mopar® Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5) or equivalent with friction modifier additive. |
| Brake Master Cylinder | Mopar® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. |
| Power Steering Reservoir | This system requires the use of Mopar® Hydraulic System Power Steering Fluid (P/N 05142893AA) or equivalent, which meets DaimlerChrysler Material Standard MS-10838. |
CHASSIS - EXPORT
| Component | Fluid, Lubricant, or Genuine Part |
|---|---|
| Automatic Transmission | Mopar® ATF+4 Automatic Transmission Fluid |
| Transfer Case | Mopar® NV 247/245 Transfer Case Lubricant |
| Axle Differential (Front-Rear) | Mopar® Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5) or equivalent with friction modifier additive. |
| Brake Master Cylinder | Mopar® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. |
| Power Steering Reservoir | This system requires the use of Mopar® Hydraulic System Power Steering Fluid (P/N 05142893AA) or equivalent, which meets DaimlerChrysler Material Standard MS-10838. |
FLUID CAPACITIES - EXCEPT EXPORT
| DESCRIPTION | U.S. | Metric |
| Fuel (Approximate) | 21 Gallons | 79 Liters |
| Engine Oil with Filter | - | - |
| 3.7 Liter Engine (5W-20, API Certified) | 5 Quarts | 4.7 Liters |
| 4.7 Liter Engine (5W-20, API Certified) | 6 Quarts | 5.7 Liters |
| 5.7 Liter Engine (5W-20, API Certified) | 7 Quarts | 6.6 Liters |
| Cooling System * | - | - |
| 3.7 Liter Engine (Mopar® Engine Coolant/Antifreeze 5 Year/100,000 Mile Formula) | 9 Quarts | 10 Liters |
| 4.7 Liter Engine (Mopar® Engine Coolant/Antifreeze 5 Year/100,000 Mile Formula) | 14.5 Quarts | 13.7 Liters |
| 5.7 Liter Engine (Mopar® Engine Coolant/Antifreeze 5 Year/100,000 Mile Formula) | 14.5 Quarts | 13.7 Liters |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
| POWER STEERING SYSTEM | ||
| Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to 19, Steering for proper fill and bleed procedures. | ||
| A/C REFRIGERANT SYSTEM | ||
| Single Unit | 0.68 kg (1.50 lbs.) | 0.68 kg (1.50 lbs.) |
| Dual Unit | 0.963 kg (2.125 lbs.) | 0.963 kg (2.125 lbs.) |
| AUTOMATIC TRANSMISSION | ||
| Service Fill - 545RFE | 2WD - 5.2 L (11 pts.) | 2WD - 5.2 L (11 pts.) |
| 4WD - 6.2 L (13 pts.) | 4WD - 6.2 L (13 pts.) | |
| Service Fill - NAG1 | 5.0 L (10.6 pts.) | 5.0 L (10.6 pts.) |
| Overhaul Fill - 545RFE | 13.33 L (28.0 pts.)! | 13.33 L (28.0 pts.)! |
| Overhaul Fill - NAG1 | 7.7 L (16.3 pts)! | 7.7 L (16.3 pts)! |
| TRANSFER CASE | ||
| NV140 | 0.65L (1.4 pts.) | 0.65L (1.4 pts.) |
| NV245 | 1.8L (3.8 pts.) | 1.8L (3.8 pts.) |
| FRONT AXLE ± 0.3 L (2 oz.) | ||
| C200F | 1.7 L (57.5 oz.) | 1.7 L (57.5 oz.) |
| C200FE | 1.7 L (57.5 oz.)← | 1.7 L (57.5 oz.)← |
| REAR AXLE ± 0.3 L (2 oz.) | ||
| REAR AXLE ± 0.3 L (2 oz.) | 2.07 L (70 oz.) | 2.07 L (70 oz.) |
| C213RE | 2.24L (75.5 oz.)← | 2.24L (75.5 oz.)← |
| *Nominal refill capacities shown. Variation may be observed from vehicle to vehicle due to manufacturing tolerance and fill procedure. | ||
| **Capacity shown includes filter. | ||
| *** Includes 0.9L (1.0 qts.) for coolant reservoir. | ||
| ←ELSD, add 118 ml (4 oz.) of Friction Modifier. | ||
| !Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary (refer to appropriate Transmission SERVICE INFORMATION article). | ||
FLUID CAPACITIES - EXPORT
| DESCRIPTION | U.S. | Metric |
| Fuel (Approximate) | - | - |
| 4.7/5.7 Liter Engines | 21 Gallons | 79 Liters |
| 3.0 Liter Diesel Engine | 22 Gallons | 83 Liters |
| Engine Oil with Filter | - | - |
| 4.7 Liter Engine | 6 Quarts | 5.7 Liters |
| 5.7 Liter Engine | 7 Quarts | 6.6 Liters |
| 3.0 Liter Diesel Engine | 10 Quarts | 9.5 Liters |
| Cooling System * | - | - |
| 4.7 Liter Engine (Mopar® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula) | 14.5 Quarts | 13.7 Liters |
| 5.7 Liter Engine (Mopar® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula) | 14.5 Quarts | 13.7 Liters |
| 3.0 Liter Diesel Engine (Mopar® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula) | 14 Quarts | 13.2 Liters |
| * Includes heater and coolant recovery bottle filled to MAX level. | ||
| POWER STEERING SYSTEM | ||
| Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to 19, Steering for proper fill and bleed procedures. | ||
| A/C REFRIGERANT SYSTEM | ||
| Single Unit | 0.68 kg (1.50 lbs.) | 0.68 kg (1.50 lbs.) |
| Dual Unit | 0.963 kg (2.125 lbs.) | 0.963 kg (2.125 lbs.) |
| AUTOMATIC TRANSMISSION | ||
| Service Fill - 545RFE | 2WD - 5.2 L (11 pts.) | 2WD - 5.2 L (11 pts.) |
| 4WD - 6.2 L (13 pts.) | 4WD - 6.2 L (13 pts.) | |
| Service Fill - NAG1 | 5.0 L (10.6 pts.) | 5.0 L (10.6 pts.) |
| Overhaul Fill - 545RFE | 13.33 L (28.0 pts.)! | 13.33 L (28.0 pts.)! |
| Overhaul Fill - NAG1 | 7.7 L (16.3 pts)! | 7.7 L (16.3 pts)! |
| TRANSFER CASE | ||
| NV140 | 0.65L (1.4 pts.) | 0.65L (1.4 pts.) |
| NV245 | 1.8L (3.8 pts.) | 1.8L (3.8 pts.) |
| FRONT AXLE ± 0.3 L (2 oz.) | ||
| C200F | 1.7 L (57.5 oz.) | 1.7 L (57.5 oz.) |
| C200FE | 1.7 L (57.5 oz.)← | 1.7 L (57.5 oz.)← |
| REAR AXLE ± 0.3 L (2 oz.) | ||
| REAR AXLE ± 0.3 L (2 oz.) | 2.07 L (70 oz.) | 2.07 L (70 oz.) |
| C213RE | 2.24L (75.5 oz.)← | 2.24L (75.5 oz.)← |
| *Nominal refill capacities shown. Variation may be observed from vehicle to vehicle due to manufacturing tolerance and fill procedure. | ||
| **Capacity shown includes filter. | ||
| *** Includes 0.9L (1.0 qts.) for coolant reservoir. | ||
| ←ELSD, add 118 ml (4 oz.) of Friction Modifier. | ||
| !Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary (refer to appropriate Transmission SERVICE INFORMATION article). | ||