Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Electronic Control Modules (Service Information)) >> Electronic Control Modules - Service Information >> Module-Transmission Control >> Standard Procedure >> Drive Learn >> Learn A Smooth 4-3 COASTDOWN And Part Throttle 4-3 KICKDOWN

Learn A Smooth 4-3 COASTDOWN And Part Throttle 4-3 KICKDOWN

WARNING: This page is about a different car, the 2007 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The transmission oil temperature must be above 43°C (110°F).

Use the following steps to have the TCM learn the UD shift volume.

  1. At a vehicle speed between 64-97 km/h (40-60 mph), perform repeated 4-3 kickdown shifts.
  2. Repeat step  1 until the UD volume becomes somewhat stable and the shift becomes smooth.
scientia non olet · About Mike's Workshop Manuals