Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Wrangler Sahara, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Fuel System) >> Fuel Injection - 2.8L Diesel >> Sensor-Intake Air Pressure >> Installation >> Installation

Sensor-Intake Air Pressure: Installation: Installation

WARNING: This page is about a different car, the 2007 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Intake Air Pressure & Mass Air Flow Sensor
GC0062767Courtesy of CHRYSLER LLC
  1. Check condition of sensor O-ring.
  2. Position Inlet Pressure Sensor (3) into top of air cleaner cover (1) with a slight twisting action.
  3. Install mounting screws.
  4. Install Inlet Pressure Sensor electrical connector.
scientia non olet · About Mike's Workshop Manuals