Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Upper Control Arm >> Removal >> Upper Control Arm - Right

Upper Control Arm - Right

  1. Raise and support the vehicle.
  2. Remove the right side tire and wheel assembly.
  3. Remove the upper ball joint nut.
  4. Separate the upper ball joint from the steering knuckle using remover C-4150A.
  5. Lower the vehicle.
  6. Remove the air box. Refer to REMOVAL .
  7. Remove the cruise control servo mounting nuts.
  8. Remove the upper control arm rear bolt.
  9. Remove the upper control arm front bolt.
  10. Remove the upper control arm from the vehicle.
scientia non olet · About Mike's Workshop Manuals