Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - Diesel >> Sensor - Fuel Pressure >> Removal >> Fuel Pressure Sensor

Fuel Pressure Sensor

  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to REMOVAL .
  3. Disconnect fuel pressure sensor electrical connector. See Figure.
  4. Remove fuel pressure sensor from fuel rail. See Figure.
scientia non olet · About Mike's Workshop Manuals