Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor - Accelerator Pedal Position >> Removal >> Accelerator Pedal Position Sensor

Accelerator Pedal Position Sensor

Fig 1: Accelerator Pedal Position Sensor
GC0025700Courtesy of CHRYSLER LLC
1 - BRAKE PEDAL
2 - APP SENSOR
  1. Disconnect negative battery cable.
  2. Disconnect accelerator pedal position sensor electrical connector. See Fig 1.
  3. Remove accelerator pedal position sensor assembly mounting bolts.
  4. Open accelerator pedal position sensor assembly and disconnect accelerator cable.
  5. Remove accelerator pedal position sensor assembly.
scientia non olet · About Mike's Workshop Manuals