Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Compass Limited, FWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Transfer Unit) >> SEAL, Output Flange >> Installation >> Installation

SEAL, Output Flange: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PINION SHAFT SEAL
GC0084422Courtesy of CHRYSLER LLC
  1. Install the output shaft seal using Installer 9851 and Handle C-4171.
  2. Install the propeller shaft. Refer to Differential and Driveline/Propeller Shaft - Installation .
scientia non olet · About Mike's Workshop Manuals