Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Exhaust System) >> SENSOR, Exhaust Temperature >> Installation >> Installation

SENSOR, Exhaust Temperature: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Diesal Particulate Filter Exhaust Temperature Sensor
GC0098844Courtesy of CHRYSLER LLC
1 - Upstream DPF Temperature Sensor Electrical Connector
2 - Upstream DPF Temperature Sensor
3 - Downstream DPF Temperature Sensor
4 - Downstream DPF Temperature Sensor Electrical Connector
  1. Position DPF downstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  2. Connect downstream temperature sensor electrical connector.
  3. Position DPF upstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  4. Connect upstream temperature sensor electrical connector.
  5. Install engine cover.
scientia non olet · About Mike's Workshop Manuals