Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Transfer Unit) >> SHIELD, Extension Housing Dust >> Installation >> Installation

SHIELD, Extension Housing Dust: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: DUST SHIELD ON PTU
GC0084423Courtesy of CHRYSLER LLC
  1. Using a block of wood (2) install the dust shield (3) onto the extension housing (1).
    Fig 2: EXTENSION AND PINION HOUSING BOLTS
    GC0084387Courtesy of CHRYSLER LLC
  2. Install the extension housing and bolts.
  3. Tighten the extension housing bolts to 38 N.m (28 ft. lbs.).
  4. Install the propeller shaft. Refer to Differential and Driveline/Propeller Shaft - Installation .
scientia non olet · About Mike's Workshop Manuals