Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Service Information) >> Front >> Bushings >> Installation >> Stabilizer Bar To Frame Bushing

Stabilizer Bar To Frame Bushing

Fig 1: Stabilizer Bar Bracket To Frame
GC0026759Courtesy of CHRYSLER LLC
1 - STABILIZER BAR
2 - RETAINER BRACKET
3 - BUSHING
  1. Install the stabilizer bar bushing (3) to the bar (1).
  2. Install the stabilizer bar bushing retainer bracket (2) bolts and tighten the two mounting bolts.
  3. Install the front splash shield.
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals