Fuel Control Solenoid

Fig 1: Identifying Fuel Quantity Solenoid And Fuel Temperature Sensor

Courtesy of CHRYSLER LLC

1 - LOW PRESSURE FUEL SUPPLY

2 - RETURN FUEL

3 - HIGH PRESSURE SUPPLY TO FUEL RAIL

4 - FUEL TEMPERATURE SENSOR

5 - FUEL QUANTITY SOLENOID

6 - HIGH PRESSURE FUEL PUMP

WARNING: No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

Clean sealing surfaces.
Install new seal on sensor.
Position the solenoid on to the high pressure pump and install fasteners. See Fig 1.
Connect wiring harness connector to the solenoid.
Connect negative battery cable.
Start the engine, allow to run, turn engine off and inspect for leaks.