Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Gas >> Motor-Idle Air Control >> Installation >> Idle Air Control Motor

Idle Air Control Motor

Fig 1: Locating Idle Air Control Motor & TPS - 3.7L V-6
GC0006577Courtesy of CHRYSLER LLC
  1. Install IAC motor (2) to throttle body. See Fig 1.
  2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque (4).
  3. Install electrical connector.
  4. Install air resonator to throttle body.