Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2007 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.7L Engine (Service Information) >> Lubrication >> Sensor/Switch-Oil Pressure >> Removal >> Oil Pressure Sensor/Switch

Oil Pressure Sensor/Switch

Fig 1: Oil Pressure Sending Unit
GC0011823Courtesy of CHRYSLER LLC
  1. Disconnect the negative cable from the battery.
  2. Raise vehicle on hoist.
  3. Remove front splash shield.
  4. Disconnect oil pressure switch connector (4).
  5. Remove the pressure switch (2).
scientia non olet · About Mike's Workshop Manuals