Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2006 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - 2.8L Diesel >> Boost Pressure Sensor >> Removal

Boost Pressure Sensor: Removal

Fig 1: Sensor Locations
GC0025703Courtesy of DAIMLERCHRYSLER CORP.
1 - BOOST PRESSURE/INTAKE AIR TEMPERATURE SENSOR
2 - FUEL RAIL PRESSURE SENSOR
  1. Disconnect negative battery cable.
  2. Remove engine cover and bracket assembly (Refer to ENGINE COVER - REMOVAL) .
  3. Disconnect sensor electrical connector. See Fig 1.
  4. Remove retaining bolts and remove sensor (1) from cylinder head cover/intake manifold. See Fig 1.
scientia non olet · About Mike's Workshop Manuals